Skip to content

Value-Based BiddingPublished 8 min read

How to Assign Conversion Values to Leads in Google Ads

Build a simple lead value model from close rates and deal values, set different values per conversion action, and know when to move to value-based bidding.

Muhammad Qitmeer, founder of Augere Labs
Muhammad Qitmeer
Co-founder and CEO, Augere Labs
Share

To assign conversion values to leads, estimate what each type of lead is worth to the business: the average deal value multiplied by the share of that lead type that becomes a customer. Put that number on the matching conversion action in Google Ads, give lower-intent actions proportionally lower values, and replace estimates with real CRM values as soon as you can import them. Once values are accurate and conversion volume is steady, you can move from Maximize conversions to a value-based strategy and let bidding prefer the leads that actually make money.

Most lead generation accounts either have no values at all, or a value of 1 on everything. That tells bidding that a newsletter sign-up and a high-intent quote request are equally good. This guide shows how to build a defensible value model with the client's own numbers.

Why values matter even before value-based bidding

Even on Maximize conversions or target CPA, values are useful:

  • Reporting. Conversion value and ROAS give the client a rough return figure instead of just cost per lead.
  • Comparisons. You can compare campaigns that produce different lead types on one scale.
  • Readiness. When the account is ready for value-based bidding, it already has value history to learn from.

But the real payoff comes when bidding uses them, which is why the values need to be grounded in data rather than picked to make the ROAS look good.

The basic lead value formula

For each lead type:

lead value = average deal value × close rate for that lead type

Where:

  • Average deal value is what a new customer is worth. Depending on the business, use first purchase value, first-year revenue, or gross profit. Pick one definition and use it consistently across all actions.
  • Close rate is the share of leads of that type that become customers, ideally measured over several months from the CRM.

If the client cannot give you close rates by lead type, start with an overall close rate and adjust for lead types using whatever qualitative information sales can give you, then replace it with real figures as data builds up.

Revenue or profit?

Revenue is easier to get and easier for clients to understand. Profit is more accurate for bidding, because a high-revenue, low-margin job is not necessarily better. If margins vary a lot between services, consider using gross profit; otherwise revenue is fine as long as the ROAS target is set with margins in mind.

Worked example (hypothetical numbers)

The numbers below are invented for illustration. They are not benchmarks.

A home renovation company runs Google Ads that produce four types of conversion. The client provides six months of CRM data:

Lead typeClose rateAverage job valueLead value
Quote request form20%$8,000$1,600
Phone call over 90 seconds25%$8,000$2,000
Brochure download2%$8,000$160
Newsletter sign-up0.5%$8,000$40

A few things follow from this:

  • Calls are slightly more valuable than form leads for this client, so they should carry a higher value. That is only true because their data says so.
  • The brochure download is worth roughly a tenth of a quote request. If it were valued the same, bidding would happily buy cheap brochure downloads instead of quote requests.
  • The newsletter sign-up is worth so little that it probably belongs as a secondary action, tracked for reporting but not used for bidding.

If the client uses profit instead of revenue, and their margin is around 30%, every value would scale down proportionally. The ratios between actions, which is what bidding mainly responds to, stay the same.

Getting the inputs from the client

The model is only as good as the numbers behind it, and most clients have never been asked for them in this form. A short list of questions usually gets you there:

  1. What is a typical new customer worth? Ask for the average first job or first-year contract value, and whether it differs a lot between services.
  2. Roughly what share of enquiries become customers? Ask separately for form leads, phone leads and any other lead types. Sales teams often have a feel for this even when the CRM is messy.
  3. Which enquiries are a waste of time? Spam, job seekers, out-of-area requests and existing customers. These lower the effective close rate of a lead type.
  4. What is the margin? Only needed if you plan to value on profit, but worth asking anyway because it shapes the ROAS target later.

Write the answers down, show the client the resulting values, and get agreement before you change anything in the account. A value model the client has signed off on is much easier to defend when reported ROAS moves.

When the CRM data is poor

Many small clients do not track outcomes reliably. In that case, use the sales team's estimates, label them as estimates in your notes, and set a date to revisit once better data exists. Starting with rough but sensible ratios between lead types is still far better than a value of 1 on everything. Fixing the underlying data, so that each lead arrives in the CRM with its source and later stages are recorded, is covered in CRM lead source attribution for HubSpot and GoHighLevel.

Absolute values vs relative values

For bidding, the ratios between actions matter most: a quote request worth ten times a brochure download. The absolute level matters for reporting and for setting a ROAS target. If the absolute values are uncertain but the ratios are sound, bidding will still prefer the right leads. Just do not present the resulting ROAS to the client as if it were audited revenue.

Different values per conversion action

Each conversion action in Google Ads has its own value setting. You can:

  • Use the same value for each conversion: a static value per action, like the lead values above. This is the right starting point for most lead generation accounts.
  • Use different values for each conversion: a dynamic value passed with the conversion tag, with a default value as fallback. Useful when the website knows something about the lead, such as the service selected or the budget range picked on the form.
  • Don't use a value: only appropriate for actions that will never be used for value-based bidding.

Dynamic values from the form

If the quote form asks for a project type or budget range, you can pass a different value depending on the answer. In GTM, read the selected option into a variable, map it to a value with a lookup table, and send it with the conversion tag's value field.

dataLayer.push({
  event: 'generate_lead',
  form_id: 'quote',
  project_type: 'kitchen',
  value: 2400,
  currency: 'USD'
});

Only do this if the form answer genuinely predicts value. If people pick the highest budget option at random, you are feeding bidding noise. Check against CRM outcomes before trusting it.

Importing real values from the CRM

Estimated values are a starting point. The better long-term setup is to import real outcomes:

  • Qualified lead with an estimated value based on the average deal and the qualified-to-won rate.
  • Closed deal with the actual deal value from the CRM.

This requires the gclid or user-provided data stored with each lead and an import process. The full method is in the guide to offline conversion import from your CRM.

Be careful about combining online and offline values. If the form fill carries $1,600 and the closed deal later imports $8,000, both primary, bidding counts $9,600 for one customer. Common solutions:

  • Keep the form fill primary with its estimated value, and import closed deals as secondary for reporting.
  • Or move the form fill to secondary once the qualified or won import has enough volume, and let the imported value drive bidding.

When to move from Maximize conversions to value-based bidding

Value-based bidding (Maximize conversion value, optionally with target ROAS) uses the values you set to decide which auctions are worth more. It is worth considering when:

  • Values differ meaningfully between actions or leads. If every lead is genuinely worth the same, value bidding behaves much like Maximize conversions.
  • Tracking is clean. No duplicate conversions, no page views marked primary. Value-based bidding amplifies tracking errors because it chases whatever looks valuable.
  • Volume is steady. The account records conversions consistently every week, not in occasional bursts.
  • Values have been in place for a while. A few weeks of value history lets you set a sensible ROAS target based on what the account already achieves.

The transition itself:

  1. Set values on all conversion actions and leave the bid strategy unchanged for a few weeks to collect value history.
  2. Switch to Maximize conversion value without a target first, or with a target ROAS close to the account's recent actual ROAS.
  3. Expect a learning period. Avoid other major changes during it.
  4. Adjust the target gradually based on results and on CRM outcomes, not only on reported ROAS.

Testing values before you switch

Before changing the bid strategy, confirm the values are actually arriving. In GTM Preview, submit each form and check the value and currency on the conversion tag. For dynamic values, try each form option and confirm the lookup table returns the right number, including the default when the field is empty. After a few days, add the conversion value column to the conversion actions view and check that the average value per conversion for each action roughly matches your model. A form action showing an average value of 1 means the tag is falling back to a default you forgot to change.

Once values are in place, conversion value rules can adjust them further by location, device or audience, if the data supports it.

Common mistakes

  • Values chosen to make ROAS look good. Inflated values make reports look better and make bidding worse.
  • The same value on every action. Bidding cannot tell good leads from weak ones.
  • Mixing revenue and profit. One action valued on revenue, another on profit. Pick one basis.
  • Double counting value when an online lead and its imported deal are both primary.
  • Never updating values. Close rates and prices change. Review the model at least every quarter.
  • Value bidding on broken tracking. If page views or duplicate conversions carry value, bidding will chase them. Fix tracking first; see fix tracking before scaling ad spend.

What we check in an audit

  • The value on every conversion action and where it came from.
  • Whether values reflect relative lead quality or are placeholders.
  • Close rates and deal values the client can provide from the CRM.
  • Whether CRM outcomes can be imported with values.
  • Whether the account is ready for value-based bidding, and with what target.

Next step

Our conversion values and value rules service builds this model with you, agreed before anything changes in the client's account. If you are not sure the base tracking is ready, a free tracking check is where we start.

Just one quick fix, not a whole account? Our founder takes small fixed-price jobs on Fiverr: Google Ads conversion tracking fix

Frequently asked questions

How do I calculate the value of a lead?

Multiply the average deal value by the close rate for that lead type. Use CRM data where possible, and give lower-intent actions proportionally lower values.

Should I use revenue or profit for conversion values?

Either works if used consistently. Profit is more accurate for bidding when margins vary between services; revenue is simpler and fine when margins are similar.

Should every conversion action have a different value?

Yes, if they differ in how often they turn into customers. Equal values tell bidding that a newsletter sign-up is as good as a quote request.

When should I switch to Maximize conversion value?

When tracking is clean, values differ meaningfully between leads, conversion volume is steady, and values have been in place long enough to set a realistic ROAS target.

Can I import deal values from the CRM?

Yes, if the CRM stores the gclid or the lead's email and phone. Closed deals can be imported with their real value, which is more accurate than an estimate.

Muhammad Qitmeer

Written by

Muhammad Qitmeer, founder of Augere Labs

Augere Labs is the white-label tracking partner behind marketing agencies. If a client account has numbers you don't trust, I'm happy to look at it with you and tell you straight what's wrong.

Connect on LinkedIn